Air valve mechanism
Air volume control valve actua
Air valve actuator
Remote controller for smoke ex
Air conditioning accessories
tuyere
Wind valve switch
The damper switch is an important device used to control the opening and closing of the damper in the ventilation system. The following is a detailed analysis of the damper switch:
1. Types
Depending on the control method and power source, the damper switch can be divided into many types, mainly including:
Manual damper switch: Control the opening and closing of the damper by manual operation. This switch is usually suitable for occasions where the control accuracy is not high, or as a backup control method.
Electric damper switch: Control the opening and closing of the damper by electrically driving the actuator (such as a motor, solenoid valve, etc.). Electric damper switches have the advantages of high control accuracy, fast response speed, and convenient operation. They are widely used in commercial buildings, industrial facilities, medical laboratories and other occasions where precise control of air circulation is required.
Pneumatic damper switch: Use compressed air as the power source to control the opening and closing of the damper through a pneumatic actuator. This switch is usually suitable for occasions with special requirements for explosion-proof and anti-corrosion.
2. Composition and working principle
As a typical representative of air valve switch, the composition and working principle of electric air valve switch are as follows:
Composition:
Actuator: usually a motor or solenoid valve, responsible for providing power to drive the opening and closing of the air valve.
Control circuit: including components such as controller and sensor, used to receive control signals and drive the actuator to act.
Feedback device: used to detect the actual position of the air valve and feed back the position signal to the control system to achieve closed-loop control.
Working principle:
When the control system receives a signal to open or close the air valve, it will send the corresponding control instruction to the control circuit.
The control circuit drives the actuator to act according to the instruction, so that the air valve moves in the specified direction.
At the same time, the feedback device will detect the position of the air valve in real time and feed back the position signal to the control system.
The control system adjusts the action of the actuator according to the feedback signal until the air valve reaches the specified position and remains stable.
3. Application
The air valve switch is widely used in HVAC systems, industrial ventilation systems, air purification systems and other fields. They can control the opening and closing of air valves according to indoor environmental parameters (such as temperature, humidity, CO2 concentration, etc.) or preset programs, thereby adjusting the air flow and maintaining the comfort and stability of the indoor environment. In commercial buildings, industrial facilities, medical laboratories and other occasions, the precise control of air valve opening and closing is of great significance for improving energy efficiency, reducing operating costs, and protecting personnel health.
Working principle of the actuator of the air volume control valve
Electric air volume control valve, as an intelligent air duct equipment, is widely used in air conditioning systems in fields such as construction, medical care, and industry. It can automatically adjust the opening of the valve according to the air flow
2024-05-06
The execution content of the fire damper actuator
To drive the valve action, a matching actuator is required. The actuator used for fire dampers may not be electrically driven, but may also be electrically driven.
2024-05-06
The structural composition of the fire damper actuator
The fire damper actuator is a type of actuator used for fire dampers in ventilation and air conditioning system pipelines, which solves the problem of inaccurate adjustment of the opening angle of valve blades, thus unable to accurately control the ventil
2024-05-06
What functions can the actuator of the air volume control valve achieve?
The actuator of the air flow regulating valve is an automated equipment used to control the air flow valve in ventilation ducts. It can automatically adjust the opening of the air valve by receiving signals from the control system to achieve the goal of c
2024-05-06